1.General Introduction

Honeywell FSL100 flame detector is a small and lightweight for easy installation but it is designed to work in tough indoor/outdoor environments, as well as potentially explosive atmospheres, mainly applicable for Light Industrial/Commercial Flame detection. Installation, set-up and operation are simple. Wide solid area coverage and fast speed of response optimize safety. With inbuilt automatic test and test lamps available to cover all models, reliability is ensured., 3 versions optional to cover a wide range of flaming fires: Ultraviolet (UV), Ultraviolet/Infrared (UV/IR) and Triple Infrared (IR3).

2.General Specifications 

Items

Description

FSL100 Flame detector   types

FSL100-UV, FSL100-UVIR and FSL100-IR3; Choice   of red or white housings

Range

110 ft /35 m (IR3), 25 m/80 ft (UV,   UV/IR) alarming within 10 seconds to a 1 ft2(0.1 m2) n-heptane fire

Cone of vision

90˚minimum   horizontal and vertical

Power

10-28 VDC (12-24   VDC nominal)

Local LEDs

Continuous green: normal operation

Continuous yellow: fault

Flashing yellow: Fault and guide to   repeat self-test after a self-test failure

Continuous red:   alarm

Current output

Standard available 4–20mA (stepped,   sinking, non-isolated)

Relay output

De-energized during normal operation, no   alarm, SPDT, 30 VDC – 2 A, 60 W max. Energized during normal   operation, no fault, SPDT, 30 VDC – 2 A, 60 W max.

Cable gland   & terminals

Cable entry M20 clearance. Supplied with   gland suitable for cable diameter from 0.2” (5.5mm) to 0.5”(13mm).   Terminals

suitable for 0.5mm2 (20AWG) to 1.5mm2   (15AWG) wire

Start up times

<10 sec

Alarm response   time

8 to 30 sec

Alarm output   settings

Selectable LEDs and relays   latching/non-latching; factory setting: latching

Automatic &   manual Self-Test

Automatic Sensor Test (built in   Self-Test) and manual Self-Test

Operating   current normal

25mA at 24 VDC

Current in   alarm, at 24 VDC

±75mA at 24 VDC

Connections to

Fire control panels using end of line   (EOL) and alarm resistors (current increase), Devices that operate via relay   switched outputs, PLCs with 4–20mA inputs

End of line and   alarm resistor

To be adjusted to the fire control   panel; free terminals are dedicated to the resistors

Housing

Glass Reinforced Polyester (GRP),   Non-incentive. UV resistant, Self-Extinguishing V–0 (UL-94)

Swivel mount

PA66, UV resistant; Stainless Steel   fixings; 280 g (0.62 lb)

Pressure   compensating element

PCE (Pressure Compensating Element)   avoids moisture build-up in the detector housing due to changes in ambient   air-pressure

Ingress   protection

P65

Temperature,   operating

–40℉ to +158℉ (–40℃ to +70℃)

Temperature,   ambient ATEX and FM class 3611

–13℉ to +158℉ (–25℃ to +70℃)

 

3.Order Code Selection

Part No.

Description

FSL100 UV (Ultraviolet) Flame Detector

FSL100-UV

UV flame detector. Suitable for ATEX   zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity)   certificate. FM3260 approval. Red Housing

FSL100-UV-W

UV flame detector. Suitable for ATEX   zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity)   certificate FM3260 approval. White Housing

FSL100 UVIR (Ultraviolet & Infrared) Flame   Detector

FSL100-UVIR

UV/IR flame detector. Suitable for ATEX   zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity)   certificate. FM3260 approval. Red Housing

FSL100-UVIR-W

UV/IR flame detector. Suitable for ATEX   zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity)   certificate FM3260 approval. White Housing

FSL100 IR3 (3 Infrared   bands) Flame Detector

FSL100-IR3

Triple IR flame detector. Suitable for   ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity)   certificate. FM3260 approval. Red Housing

FSL100-IR3-W

Triple IR flame detector. Suitable for   ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity)   certificate. FM3260 approval. White Housing.

Accessories

FSL100-SM21

FSL100 Optional swivel mount

FSL100-TL

FSL100 test lamp, incl. universal   charger and carrying case; non EX

FSL100-TLX

FSL100 test lamp, incl. carrying case;   intrinsically safe

Spare Parts

FSL100-TLBT

12 VDC battery for FSL-TL test lamp

FSL100-TLBU

H3 light bulb for FSL-TL test lamp

FSL100-TLCH

Universal charger kit for FSL-TL test   lamp